Our AS150 and AS500 Alignment Shoe systems make final precise positioning of a load simple and accurate. Each component is hand-portable, allowing transportation, set-up, and mobilization with minimal personnel and equipment.
Features
- Two different designs - a lightweight 150-ton capacity system and heavy-duty 500-ton capacity system
- Low working height and small footprint
-
Durable rubber base grips the ground to prevent unwanted movement
- Completely hand-portable
- System is contained in a compact steel box for easy transportation
Technical Specifications
| Full System Capacity (4 Alignment Shoes) | 500 ton |
| Alignment Shoe Capacity (each) | 125 ton |
| Cylinder Capacity | 50 ton |
| Cylinder Stroke | 2" |
| Working Height | 1.5" |
| System Coefficient of Friction | 15-20% |
| Slide Surface Material | Graphite |
| Maximum Slope | +/- 2% |
| Maximum Operating Pressure | 10,000 psi |
Dimensions
| Length | Width | Height | Weight | |
| Alignment Shoe Base | 34" | 20" | 6" | 110 lb |
| Slider Plate | 17" | 10.375" | 0.75" | 25 lb |
| Push Cylinder | 5" | 5" | 7" | 37 lb |
| Full System in Storage Box | 34" | 34" | 22" | 1075 lb |
| Full System Capacity (4 Alignment Shoes) | 454 tonne |
| Alignment Shoe Capacity (each) | 113 tonne |
| Cylinder Capacity | 45.4 tonne |
| Cylinder Stroke | 5 cm |
| Working Height | 3.8 cm |
| System Coefficient of Friction | 15-20% |
| Slide Surface Material | Graphite |
| Maximum Slope | +/- 2% |
| Maximum Operating Pressure | 700 bar |
Dimensions
| Length | Width | Height | Weight | |
| Alignment Shoe Base | 86 cm | 51 cm | 15 cm | 50 kg |
| Slider Plate | 44 cm | 26 cm | 1.9 cm | 11.3 kg |
| Push Cylinder | 13 cm | 13 cm | 18.3 cm | 16.8 kg |
| Full System in Storage Box | 86 cm | 86 cm | 56 cm | 488 kg |
Support
Hydra-Slide Alignment Shoes are one of the safest methods for final positioning of heavy loads. The shoes are very low-profile, keeping the load close to the ground and moving along a guided path. The load is never freely suspended. When used as intended, they don't require any winches, holdbacks, or other external force/restraint of any kind. They are controlled by a single operator and there is no need for any personnel to be close to the load while it is moving.
Our AS500 Alignment Shoes are coated with dry graphite on their slide contact surfaces. The graphite is used for several reasons: first, it provides a 0.15 - 0.20 friction coefficient. The relatively high friction values increase the safety of the move by virtually eliminating any risk of uncontrolled movement or runaway. Secondly, because it is a dry lubricant, any contamination, grit, or other debris that falls on the tracks can simply be brushed off and does not become embedded in the system, preventing damage to the system surfaces and hydraulics. The graphite is also non-hazardous and readily available for periodic maintenance.
Frequently Used Together
Conventional Hydraulic Power Units
These single-circuit, cart-mounted power units are suitable for the operation of all Hydra-Slide skidding systems, turntables, and alignment shoes, as well as most double-acting jacking applications. They are suitable in applications that do not require synchronized flow rates.
HT500 Heavy Track System
The HT500 features rigid steel tracks capable of carrying loads over unsupported spans, is engineered to push loads up to 500 tons, and has a working height of only 8″ (205mm).
LP350 Low Profile System
The LP350 is our workhorse low-profile skidding system. Engineered for function and convenience, the LP350 has a durable graphite slide surface and a working height of 1.5" (38mm).
How to Buy
Information on product purchasing, lead time, shipping, and more.