XLP30

Extreme Low Profile System

  • Simple, intuitive setup and operation
  • Completely hand-portable
  • System contained in a compact steel box for easy transportation

Technical Specifications

Skidding Push Capacity* 30 Ton
Skidding Pull Capacity* 30 Ton
Working Height 1.125"
Cylinder Capacity - Push 10 Ton
Cylinder Capacity - Pull 5 Ton
Cylinder Stroke 10"
System Coefficient of Friction 10-15%
Slide Surface Material UHMW Polyethylene
Maximum Slope +/- 2%
Track Alignment Tolerance +/- 0.25"
Maximum Operating Pressure 10,000 PSI

* based on standard system using (2) hydraulic cylinders

Dimensions

Length Width Height Weight
Track Section 56" 6.0" 1.0" 42 lb
Slider Plate - 2' 24" 3.75" 0.375" 8.9 lb
Slider Plate - 4' 48" 3.75" 0.375" 18.6 lb
Push/Pull Head 18" 3.75" 4" 11 lb
Cylinder Assembly 18" 3.75" 4" 65 lb
Full System in Storage Box 59" 39" 29" 1150 lb
Skidding Push Capacity* 27 tonne
Skidding Pull Capacity* 27 tonne
Cylinder Capacity - Push 9 tonne
Cylinder Capacity - Pull 4.5 tonne
Cylinder Stroke 254 mm
System Coefficient of Friction 10-15%
Slide Surface Material UHMW Polyethylene
Maximum Slope +/- 2%
Track Alignment Tolerance +/- 6 mm
Maximum Operating Pressure 700 bar

* based on standard system using (2) hydraulic cylinders

Dimensions

Length Width Height Weight
Track Section 1.42 m 150 mm 25 mm 19 kg
Slider Plate - 2' 610 mm 95 mm 10 mm 4.0 kg
Slider Plate - 4' 1.22 m 95 mm 10 mm 8.4 kg
Push/Pull Head 460 mm 95 mm 100 mm 5.0 kg
Cylinder Assembly 460 mm 150 mm 180 mm 29 kg
Full System in Storage Box 1.50 m 990 mm 740 mm 518 kg

Support

Our Low Profile skidding systems are a simple, effective tool for moving heavy loads horizontally. The load, whether it is a transformer, heat exchanger, or some other heavy equipment, sits on slider plates on a guided track. The push/pull cylinder is connected to these slider plates with a pusher head. This is the piece of the system that makes contact with the load and is then pushed along by hydraulic cylinders.

UHMW-PE (Ultra High Molecular Weight Polyethylene) sliding pads contacting a smooth steel surface. Clean system, can be built with stainless steel if required.

Our standard XLP30 kit includes track sections, slider plates, all connecting hardware, and hydraulic push/pull cylinders. The full system is contained in a storage box for greater protection and portability. We can accommodate most requests for additional components or different track lengths. The hydraulic power unit and hoses are offered separately.


Looking for
more support?

We can help.

Contact Us

Frequently Used Together

TT150 Turntable

Our engineered Turntables are extremely simple and low-maintenance, and they solve a big problem: rotating any heavy or oversized load accurately and efficiently, even in areas of restricted access or clearance. Ideal for rotating items such as transformers or generators during handling and installation, they incorporate a reversible, hydraulically powered rotating mechanism for precise control.

Conventional Hydraulic Power Units

These single-circuit, cart-mounted power units are suitable for the operation of all Hydra-Slide skidding systems, turntables, and alignment shoes, as well as most double-acting jacking applications. They are suitable in applications that do not require synchronized flow rates.

How to Buy

Information on product purchasing, lead time, shipping, and more.

Call Us

+1-519-900-1450

Send a Message

Contact Us

The XLP150 presented a myriad of safety and productivity advantages."

Edwards Moving & Rigging used their XLP150 skidding system to remove and replace small transformers inside a high-security power plant in the southeastern US. The work site presented numerous challenges—low headroom, a confined workspace, and no forklift access—making the hand-portable and compact XLP150 an ideal solution.

PDP_XLP150_CSLogo_Gray.png