Extreme Low Profile System
The XLP150 features a 1.25″ (32mm) profile, is completely hand-portable, requires limited jacking, and can push or pull up to 150 tons. It’s quite simply one of the most versatile skidding systems we’ve ever designed.
Skidding Push Capacity* | 250 Ton |
Skidding Pull Capacity* | 150 Ton |
Cylinder Capacity - Push | 30 Ton |
Cylinder Capacity - Pull | 15 Ton |
Cylinder Stroke | 14.25" |
Skidding Speed** | 90 ft/hr |
System Coefficient of Friction | 10-15% |
Slide Surface Material | UHMW Polyethylene |
Maximum Slope | +/- 2% |
Track Alignment Tolerance | +/- 0.25" |
Maximum Operating Pressure | 10,000 PSI |
* based on standard system containing 2x push cylinders
** Speed based on 20-2-4D Hydra-Pac
Length | Width | Height | Weight | |
Track Section | 60" | 14.75" | 1.125" | 65 lb |
Slider Plate - 1' | 12" | 7.75" | 0.375" | 7.5 lb |
Slider Plate - 2' | 24" | 7.75" | 0.375" | 17.5 lb |
Slider Plate - 4' | 48" | 7.75" | 0.375" | 40 lb |
Standard Box wth Standard XLP System | 76" | 48" | 31" | 2090 lb |
Skidding Push Capacity* | 227 tonne |
Skidding Pull Capacity* | 136 tonne |
Cylinder Capacity - Push | 27 tonne |
Cylinder Capacity - Pull | 13.5 tonne |
Cylinder Stroke | 362 mm |
Skidding Speed** | 28 m/hr |
System Coefficient of Friction | 10-15% |
Slide Surface Material | UHMW Polyethylene |
Maximum Slope | +/- 2% |
Track Alignment Tolerance | +/- 6 mm |
Maximum Operating Pressure | 700 bar |
* based on standard system containing 2x push cylinders
** Speed based on 20-2-4D Hydra-Pac
Length | Width | Height | Weight | |
Track Section | 152 cm | 37 cm | 2.9 cm | 29 kg |
Slider Plate - 1' | 30 cm | 20 cm | 1.0 cm | 3.4 kg |
Slider Plate - 2' | 61 cm | 20 cm | 1.0 cm | 7.9 kg |
Slider Plate - 4' | 122 cm | 20 cm | 1.0 cm | 18 kg |
Standard Box wth Standard XLP System | 193 cm | 122 cm | 79 cm | 948 kg |
Our Low Profile skidding systems are a simple, effective tool for moving heavy loads horizontally. The load, whether it is a transformer, heat exchanger, or some other heavy equipment, sits on slider plates on a guided track. The push/pull cylinder is connected to these slider plates with a pusher head. This is the piece of the system that makes contact with the load and is then pushed along by hydraulic cylinders.
UHMW-PE (Ultra High Molecular Weight Polyethylene) sliding pads contacting a smooth steel surface. Clean system, can be built with stainless steel if required.
Our standard XLP150 kit includes track sections, slider plates, all connecting hardware, and hydraulic push/pull cylinders. The full system is contained in a storage box for greater protection and portability. We can accommodate most requests for additional components or different track lengths. The hydraulic power unit and hoses are offered separately.
Our engineered Turntables are extremely simple and low-maintenance, and they solve a big problem: rotating any heavy or oversized load accurately and efficiently, even in areas of restricted access or clearance. Ideal for rotating items such as transformers or generators during handling and installation, they incorporate a reversible, hydraulically powered rotating mechanism for precise control.
These single-circuit, cart-mounted power units are suitable for the operation of all Hydra-Slide skidding systems, turntables, and alignment shoes, as well as most double-acting jacking applications. They are suitable in applications that do not require synchronized flow rates.
Information on product purchasing, lead time, shipping, and more.
The XLP150 presented a myriad of safety and productivity advantages."
Edwards Moving & Rigging used their XLP150 skidding system to remove and replace small transformers inside a high-security power plant in the southeastern US. The work site presented numerous challenges—low headroom, a confined workspace, and no forklift access—making the hand-portable and compact XLP150 an ideal solution.